 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| ACE809 Technology Description 3-Pin Microprocessor Reset Circuits The ACE809 microprocessor supervisory circuits can be used to monitor the power supplies in microprocessor and digital systems. They provide s reset to the microprocessor during power-up, power-down and brown-out conditions. The function of the ACE809 is to monitor the VCC supply voltage, and assert a reset signal whenever this voltage declines below the factory-programmed reset threshold. The reset signal remains asserted for 240ms after VCC rises above the threshold. The ACE809 has an active-low RESET output. The output of the ACE809 is guaranteed valid down to VCC =1V. The device is available in a SOT-23-3L package. The ACE809 is optimized to reject fast transient glitches on the VCC line. Low supply current of 25A, (VCC=3.3V) makes these devices suitable for battery powered applications. Features * * * * * * * * * * Precision Vcc Monitor for 3.0V,3.3V and 5.0V Supplies 140ms Guaranteed Minimum RESET Output Duration RESET Output Guaranteed to Vcc=1.0V Low 25A Supply Current. Vcc Transient Immunity. No External Components. Application Embedded systems Computers Critical P Power Supply Monitoring Battery Powered equipment Absolute Maximum Ratings Parameter Symbol Max Unit Supply Voltage VCC 5.5 V Output Voltage RESET -0.3 to (Vcc+0.3) V Input Current 20 mA Output Current IOUT 20 mA Power Dissipation PD Internally Limited Thermal resistance junction to ambient /W 230 SOT-23-3 JA Operating junction temperature range TJ 0 to 125 Storage temperature range TSTG -60 to 150 Note 1: Exceeding these rating could cause damage to the device. All voltages are with respect to Ground. Currents are positive into, negative out of the specified terminal. Note 2: Voltage values are with respect to the anode terminal unless otherwise noted. VER 1.2 1 ACE809 Technology Packaging Type SOT-23-3 3 3-Pin Microprocessor Reset Circuits 1 2 Pin No 1 2 3 Symbol GND RESET Vcc Description Ground RESET output remains low while Vcc is below the reset voltage threshold and for 240msec(typ.) after Vcc rises above reset threshold Supply Voltage (typ.) Ordering information Selection Guide ACE809 X XX + H Halogen - free Pb - free BM: SOT-23-3 Vout Volts : L : 4.63V M : 4.38V J : 4.00V T : 3.08V S : 2.93V R : 2.63V Power Dissipation Table Package BM TA 25 OC TA=70 OC TA= 85 OC JA Df(mW/) ( C /W ) TA25 Power rating(mW) Power rating(mW) Power rating (mW) 230 3.5 543 348 283 O Note:1.Exceeding the maximum allowable power dissipation will result in excessive die temperature, and the regulator will go into Thermal shutdown. 2.TJ: Junction Temperature Calculation TJ = TA + ( PD x JA ) The JA numbers are guidelines for the thermal performance of the device/PC-board system. All of the above assume no Ambient airflow. 3.JA : Thermal Resistance-Junction to Ambient, DF: Derating factor, Po: Power consumption VER 1.2 2 ACE809 Technology Recommended Work Conditions Item Input Voltage (Vin) Junction Temperature (TJ) Min 2.0 Typ. 0~125 3-Pin Microprocessor Reset Circuits Max 5.5 Unit V Electrical Characteristics Parameter Input Voltage Supply Current Symbol Vcc Icc ACE809-4.63 ACE809-4.38 ACE809-4.00 ACE809-3.08 ACE809-2.93 ACE809-2.63 Test Conditions Min. 2.0 4.54 4.29 3.92 3.02 2.87 2.58 18 4.63 4.38 4.00 3.08 2.93 2.63 30 20 240 VOL VOH ISINK=3mA ISOURCE=800uA 0.4 0.8Vcc Typ. Max. 5.5 25 4.72 4.47 4.08 3.14 2.99 2.68 Unit V uA Reset Threshold VTH V Reset Threshold Temperature Coefficient (Note) Vcc to Reset Delay Vcc=VTH to (VTH-100mV) Reset Active Timeout Period RESET Output Voltage Low RESET Output Voltage High ppm/ usec msec V V Typical Vcc Applications C=0.1uF Vcc ACE809 RESET GND Vcc Processor RESET Input GND VER 1.2 3 ACE809 Technology Typical Performance Characteristics Supply Current VS. Temperature 3-Pin Microprocessor Reset Circuits Normalized Threshold VS. Temperature Temperature () Temperature () Power-Down Reset Delay VS. Temperature Power-Up Reset Timeout VS. Temperature Temperature () Temperature () VER 1.2 4 ACE809 Technology Packing Information SOT-23-3 3-Pin Microprocessor Reset Circuits VER 1.2 5 ACE809 Technology 3-Pin Microprocessor Reset Circuits Notes ACE does not assume any responsibility for use as critical components in life support devices or systems without the express written approval of the president and general counsel of ACE Electronics Co., LTD. As sued herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and shoes failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. ACE Technology Co., LTD. http://www.ace-ele.com/ VER 1.2 6 |
Price & Availability of ACE809LBMH
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |